Simplex TrueAlarm Photoelectric Smoke (4098-9714EA)

Simplex TrueAlarm Photoelectric Smoke (4098-9714EA)

Simplex IDNet Supervised IAM (4090-9051)

Simplex IDNet Supervised IAM (4090-9051)

Simplex TrueAlarm Analogue Addressable Detector Base (4098-9789EA )

$83.22
TrueAlarm detector bases contain integral addressable electronics that constantly monitor the status of the detachable photoelectric, ionisation, or heat detectors. Each detector’s output is digitised and transmitted to the system CIE every four seconds.
SKU
4098-9789EA

FSP Can Supply Simplex TrueAlarm Analogue Addressable Detector Base (4098-9789EA) which contain addressable electronics to allow the constant monitoring the various types of detachable detectors, such as: photoelectric, ionisation, or heat.

Each detector's output is digitised and transmitted to the system Panel every four seconds.

Since TrueAlarm detectors use the same base, different detector types can be easily interchanged to meet specific location requirements, for example, during building construction, or when conditions are temporarily dusty. Instead of covering the smoke detectors(causing them to be disabled), heat detectors may be installed without reprogramming the CIE.

Although the CIE will indicate an incorrect detector type, the heat detector will operate at a default sensitivity maintaining building protection at that location.

The 4098-9789EA can be used in areas that may experience an increased moisture level, eg under eaves.

Part Number 4098-9789EA

Operating Voltage:24 to 40Vdc*
Quiescent Current (max):400µA
Alarm Current (max):3.2mA
Relative Humidity:10% to 95% (n/cond)
Ambient Temperature:0 to +55°C
Dimensions:124 dia x 35mm
ActivFire Listed:afp-1225 & 1246
Click here for 4098-9789EA TrueAlarm Base Datapage