|
OBSELETE Simplex IDNET+ Module AU S/W (4100-3107AU)
The IDNet+ is an enhanced IDNet loop card suitable
for use in SIMPLEX 4100ES and 4100U systems. It
has inbuilt addressable short circuit isolators which
can be configured to provide up to four isolated loops
or 8 spur circuits.
SKU
4100-3107AU
The Simplex IDNet+ is an enhanced IDNet loop card suitable for use in SIMPLEX 4100ES and 4100U systems. It has inbuilt addressable short circuit isolators which can be configured to provide up to four isolated loops or 8 spur circuits.
Features
- The IDNet+ card has four built-in loop isolators, each with its own set of terminals. These can be wired to provide up to four loops of IDNet devices. Wiring faults on one loop will not affect any of the other loops.
- Removes the need for panel mounted isolators at the start and end of loops.
- The loop wiring is electrically isolated from the panel's 24V supply. Improved noise immunity eliminates the need for shielded and twisted wire in most applications.
- Collectively, up to 246 compatible external devices can be connected to the IDNet+ card. These devices generally do not need to be arranged in any special order, and can be any IDNet or IDNet-compatible MAPNET device. Addresses 247-250 are reserved for the in-built loop isolators.
- IDNet+ is a PDI format card, occupying two card positions.
- It is 200mm wide and 127mm high
- On-board fault indicators for each loop output.
- Earth fault detection diagnostics test each output.
- Duplicate Device Detection and Weak Answer Detection.
- Diagnostics to assist in locating devices installed incorrectly
Possible Markings on Board: 566-675 742-146
Spares Group: Internal slave modules