|
Vigilant Smoke Detector Analogue Photoelectric Black (P131A-MK2BLK)
$416.56
Vigilant Smoke Detector Analogue Photoelectric Black (P131A-MK2BLK)
SKU
P131A-MK2BLK
Vigilant Smoke Detector Analogue Photoelectric Black (P131A-MK2BLK) is available to buy in increments of 1
FSP Can Supply Vigilant Smoke Detector Analogue Photoelectric Black (P131A-MK2BLK) is designed for use with Vigilant MX4428 analogue panel to provide open area protection.
The P131A Mark 2 Detector has a high degree of false alarm immunity thanks to its state-of-the-art sensing chamber and advanced SmartSense algorithms.
Up to 99 sensors and 99 modules may be wired to each MPR addressable loop. Use with Vigilant Z131A standard base or Vigilant Z132A Sounder base.
Installation
The Detector mounts on the Vigilant B501AUS 130 series detector Base or B200SR base, has two LEDs on opposing sides with and optional remote LED annunciator capability (E500Mk2) available.
Installation should comply with the MX4428 Installation Manual (LT0070) in order to meet the AS1670.1/NZS4512 standard and offer maximum performance.
Vigilant Smoke Detector Black Photoelectric Technical Specifications and Information
| Operating Voltage Range: | 15 to 32 VDC |
| Maximum Average Standby Current: | 360μA @ 24 VDC (one communication every 5 seconds with LED blink enabled) |
| Maximum Alarm Current (LED on): | 6.5 mA @ 24 VDC |
| Operating Humidity Range: | 10% to 93% Relative Humidity, Non-condensing |
| Operating Temperature Range: | -10C to 49C (14F to 120F) |
| Height: | 51 mm installed in Z131A Base |
| Diameter: | 102 mm installed in Z131 A Base |
| Shipping Weight: | 147 g |
| Nominal Alarm Sensitivity: | 6% obs/m |
| Warranty: | 3 Years |
Vigilant Smoke Detector Photoelectric Black Data Sheet
Vigilant Photoelectric Smoke Detector P131A MK2 Datasheet
Installation warning The C131A-Mk2 is not suitable for use when it may be exposed to condensing moisture, mist or water spray.
Related Products
Check items to add to the cart or
