Vigilant MUBEx Base Detector For 600/800Ex (517.050.610)

Vigilant MUBEx Base Detector For 600/800Ex (517.050.610)

Vigilant 5BEx 5

Vigilant 5BEx 5" Universal Intrinsically Safe Base (517.050.023)

Vigilant The ZAU401 Zone Adaptor interface (PA0838)

$906.54
ZAU401 Zone Adaptor Unit The ZAU401 (Rev 2) can be thought of as a single zone circuit module that can be added to different panels to make them compatible with specific detectors.
SKU
PA0838
ZAU401 Zone Adaptor Unit The ZAU401 (Rev 2) can be thought of as a single zone circuit module that can be added to different panels to make them compatible with specific detectors. For example, it can be used with the S231i+ flame detector. (Refer PBG0080). In addition, the AZC characteristics of the ZAU401 make it particularly suitable for Intrinsically Safe applications when used with I.S. barriers (refer PBG0081). The ZAU401 (Rev 2) can support up to 2mA of quiescent detector current and uses a 3k9 5% ELD resistor. The detectors must provide current limiting in alarm, or a series resistor must be included to limit the alarm current to below 100mA or lower if the detector has a lower maximum alarm current rating. Its output voltage in alarm (to the panel) is compatible with most panels, and the ELD used (panel side) is that from the original panel. It operates directly off the 24V panel supply, and draws approximately 20mA in the normal condition. The ZAU401 monitors the voltage provided by the panel to its Zone+ input, and when this disappears during a reset operation the ZAU401 turns off the supply to its detectors – thus resetting them as well. Part Number PA0838

 

Specification

Click here for ZAU401 Zone Adaptor interface Datapage